• Wrap Seal Quick Repair Kit For Pipe Leaks

Wrap Seal Quick Repair Kit For Pipe Leaks

Brand: SealXpert

Description

Please click on the YouTube link below to have a better idea on how Wrap Seal Quick Repair Kit For Pipe Leaks works! 
>>> youtu.be/GYB2UT5Wub8 <<<


FEATURES:
Repairs leak in 30 minutes
Applicable to pipes up to 18" (457 mm) diameter
Applicable on any metal or non-metal pipes
Repairs T-joint, elbow joint, valve thread, valve body
Withstand pressure up to 400 psi (28 kg/cm2)
Withstand temperature up to 200 °C (392 °F)
Safe for drinking water and resistant to most chemicals
Reinforce and strengthen pipe after repair
Permanent repair and extend service life of pipes


PACKAGE :

1 roll of Wrap Seal Fiberglass Tape:
- 2" x 5' (50 mm x 1.2 m); or
- 2" x 6' (50 mm x 1.8 m); or
- 2" x 12' (50 mm x 3.6 m); or
- 3" x 9' (75 mm x 2.7 m); or
- 4" x 12' (100 mm x 3.6 m).
1 unit of Seal Stic Quick Cure Epoxy
1 pair of latex gloves
Operating instruction


APPLICABLE MATERIAL:
Steel1
Copper
Aluminium
Galvanized steel
PVC
CPVC
Stainless steel
Polyethylene
Polypropylene
Cast-iron
Concrete
FRP/GRE


CHEMICAL RESISTANCE:
Oil
Water (drinking water, wastewater, steam)
Solvents (acetone, toluene, MEK, ethyl alcohol)
Mild acids (hydrochloric acid, sulfuric acid) and alkalis
Chemical (ethylene glycol, xylenes, ammonia)
Hydrocarbons
Bases
Slurries
Fuels (petroleum, diesels, gasoline)
Gases (LNG, LPG)
Organic salts


WORKING TIME (FIBERGLASS TAPE):
 1 minute at 30 °C (86 °F)


CURING TIME:
30 minutes at 30 °C (86 °F)
Heat may be applied to decrease curing time
Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.


APPLICATION:
Pipe repairs
offline repairs
sealing joints
hazardous material spill control
reinforce thinning walls
Abrasion protection
Structural reinforcement
Repairs in hard to reach areas
Underwater repairs


OPERATING TEMPERATURE:
Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)


OPERATING PRESSURE:
Recommended for pressure up to 400 psi (28 kg/cm2)
(Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)



You may also like